CLA-B

Compact sound attenuator with centre baffle for circular ducts

Equipped with an acoustic centre baffle
Extremely low installation height
Very good sound attenuation
Fibre-migration proof
Dim up to 400 air tightness class D
Dim 500 to 800 air tightness class C
Low pressure drop
Mineral wool
Galvanised sheet steel to Environmental Class C3
Fire-resistance class EI30 to EI120*
* See the table for requisite safety distance

Calculate with your requirements

CLA-B is available in a RE:3 version. A RE:3 product is an alternative to our conventional products, systems and services, an alternative which is reduced, reused or revitalised. We ensure a notably lower level of embodied carbon, built-in CO2, and let these solutions wear our RE:3 symbol. Read more about CLA RE:3 here.

Technical description

Design

Material and surface treatment

The standard CLA-B is made of galvanised sheet steel to environmental class C3 (equivalent to M2 as per AMA VVS2016). The connection spigots are fitted with rubber seal rings.

CLA-B up to dim 400 with mineral wool and self-supporting polyester surface layer FarTex^®.

The CLA-B dim 500 to 800.

The sound-attenuating material on dimension 500-800 ISOVER Cleantec^® PLUS, is a type-approved insulation material consisting of long-fibred compressed mineral wool.

The mineral wool is covered with a micro-perforated aluminium foil.

ISOVER Cleantec^® PLUS is type-approved for cleaning using liquids with a plastic brush or even a highpressure cleaning apparatus. Naturally it also conforms to relevant standards regarding cleaning, fibre entrainment, resistance to ageing and emissions, etc. to type-approval number 2706/92.

Installation, commissioning and maintenance

The connection spigots on this product are designed for connection to ducts only. It is important to drive screws or blind rivets into the sheet-metal edge on the connection spigot.

The product can be mounted by means of approved hangers that satisfy the provisions to load bearing capacity rating R corresponding to the fire resistance the structural element of the building, for example load bearing capacity rating R60 for elements of structure to fire-resistance class EI60.

Dimension	Length	Static integral attenuation, dB to ISO 7235
(mm)	(mm)	63	125	250	500	1K	2K	4K	8K
250	500	5	6	8	14	24	32	20	9
250	1000	7	12	17	30	43	40	34	16
315	500	4	6	8	14	25	19	14	8
315	1000	6	10	14	26	45	42	21	12
400	500	4	6	8	14	22	16	10	6
400	1000	5	9	14	23	40	24	13	9
500	600	4	5	15	23	29	20	15	14
500	900	4	6	15	23	29	20	15	14
500	1200	5	7	16	24	30	22	16	14
630	600	3	4	12	19	22	17	12	9
630	900	3	5	12	19	22	17	12	9
630	1200	4	6	13	20	23	18	12	10
800	600	2	2	10	12	11	7	6	2
800	900	2	3	10	12	11	7	6	2
800	1200	3	4	11	13	11	8	7	3

Nordic Swan listed

The product is listed in the database for building products that can be used in Nordic Swan Ecolabelled buildings.

Filter

Include Accessory documents

Document	Article	Document type	Date
Transfer air solutions (pdf 970.08kB)	ALS, CLA-A, GRC, SOTTO	Brochure	06/11/2023
Compact sound attenuator with centre baffle for circular ducts (pdf 305.39kB)	CLA-B	Technical catalogue	06/09/2024
Installation, Maintenance (pdf 239.05kB)	CLA-A; CLA-B	IOM Manual	15/01/2024
Acoustics Overview (pdf 2.43MB)	CLA-A, CLA-B, SORDO-A, SORDO-B, SORDO-C, SORDO-P, SORDO-PF, CALMO, CADENZA, LARGO, LENTO, MORENDO, FACILE, ALD, CTM, CTK	Brochure	08/04/2023
Type approval (pdf 137.87kB)	CLA-A, CLA-B	Quality	20/02/2024

Whilst we have made every effort to ensure information on this website is up to date and accurate, the technical specification and availability of products/services listed on this website may vary market to market and are subject to change without notice. Please contact your regional representative or visit your local website for further details.